Washing robot Cleansman

Cleansman for barn cleaning without manual post-cleaning

Our washing robot has an integrated frequency-controlled high-pressure cleaner. This enables different washing programmes with different water pressures. Columns are cleaned at full power, sensitive stable elements at low pressure.


>> Cleansmann cleans floors and walls at full power, the sensitive ceiling at low pressure!

The special spray programme ensures full-surface cleaning without spray shadows. Cleaning is carried out in 2 parallel lanes.


In step 1, the tracks run across the aisle,

in step 2, they run parallel to the aisle.

This means that no areas are left for manual re-cleaning.

>> Cleansman has a full-surface spray pattern, 100 % coverage!

 

The graphic shows the efficiency of different spray sequences.

The Cleansman washing robot is installed directly in the compartment with the integrated high-pressure cleaner. The sensors measure the entire compartment. The computerised control system determines the automatic obstacle avoidance and work steps for the compartment.


>> Ready to go at the touch of a button! No set-up times!

The frequency control on the high-pressure pump enables the programme sequences for cleaning without manual pre- and post-cleaning:

  •     Soaking with low pressure
  •     Intensive cleaning of floor and lower walls with maximum pressure, at up to 70 litres per minute, parallel lanes to the compartment aisle
  •     Intensive cleaning of floor and lower walls with maximum pressure, parallel lanes offset by 90°
  •     Ceiling wash with low pressure
  •     Final wash with medium pressure

Cleansman has an aluminium base frame and a stainless steel casing. Together with the control unit, all components are designed for a long service life. The telescopic booms with internal spindle drive are round and therefore protected against moisture with a very good seal. The washing nozzles at the end wash simultaneously and rotate 360°. The telescopic arms extend automatically. One-sided operation is also possible.

Cleansman is positioned using a stepper motor and is guided in batches to match the parallel tracks.

Cleansman will be available at the end of 2026!

Product Details

    Technical Data

    Length x depth/width x height 1.75 x 0.55 x 1.70 m
    Water output 15 - 70 l/min
    Pressure 10 - 80 bar
    Hose length 45 m on stainless steel automatic hose reel, NW 25 rubber fabric hose
    Pump 3 - cylinder piston pump with bronze connecting rod, thermal protection, filter
    Motor 2.5 - 11 kW with frequency converter
    Drive 12 volt, LiFePo4 battery for buffering and travelling, 0 - 5 km/h, wheels 300/250 mm
    Lateral support wheels 55-112 cm extendable
    Round tube telescope with internal aluminium spindle
    Frame Aluminium base frame with stainless steel cladding

    More information

    Service & Product inquiry

    Would you like information material or a non-binding offer? We are looking forward to your inquiry!